MiniFob Blog

If you haven't already noticed, there are a ton of different key blanks out there. From SC4 to A1114K to WR5 to everything in between, it can be difficult to memorize every single key type, especially when it comes to remembering if certain models are interchangeable...

Turning your phone into a fob is easier than you think! Attach our sticker fob to the back of your phone or phone case to make it an RFID fob and voila, now you don't need to carry around a bulky keychain. Made out of strong material and 3M adhesive, the sticker fob...

Here’s how you can calibrate the guide on your key cutting machine to to make sure it can cut according to the blade at the same level. The way to check it involves using 2 blanks on either side to see how much of it cuts from a run. The goal is for half of the width...

With car theft and other types of RFID theft on the rise, using a Faraday pouch is highly recommended to prevent thieves from copying the RFID signal that's emitted from your devices such as car fobs/keys. This compact faraday pouch allows you to organize and safely...

*BEFORE ANYTHING, remember to unplug your key cutting machine before replacing! After moderate to heavy use of your cutting machine, it's recommended to replace the cutting wheel on your key cutting machine to prolong its effectiveness. You’d have to replace the...

Sometimes when you're cutting keys, the original key may have deeper than normal grooves/cuts. If the grooves are too deep, the key cutting machine you're using may not be able to replicate the exact same cut. To get around this, you can use key lifts to lift the keys...