Screen Protector Installation for iPhone
You just bought a brand-new phone, and the last thing you want is a scratch on that pristine display. But we get it—installing a screen protector can be nerve-wracking. One wrong move and you’re staring at an annoying bubble for the next two years.
At MiniFob, we’re all about precision and hardware. Whether we’re
Follow our Pro-Shield Method for a perfect, bubble-free finish.
Pricing
Plans For Every Need
Bronze
- 7H + Clear Film
- 30-Day Warranty
Silver
- 7H + Privacy
- 30-Day Warranty
Gold
- 7H + Clear Film
- 30 Day Warranty
Teal (Subscription)
- 7H, 9H - Privacy or Clear
- 1 Phone Per Month (No Rollover)
Have Questions?
Our Features
All Hosting Plans Include
The Pre-Game: Setup for Success
Don't just peel and stick! Environmental prep is the secret to a professional install.
Work in a "Clean Room": Steam up your bathroom for a minute. The moisture drops dust particles out of the air so they don't land on your screen.
Wash Your Hands: Skin oils are the enemy of adhesive.
Check Your Kit: You’ll need an alcohol wipe, a microfiber cloth, and a dust-removal sticker.
1. The Deep Clean
Use the provided alcohol prep pad to scrub away fingerprints and grime. Follow up with the microfiber cloth, buffing in circular motions until the glass is invisible.
2. The Dust Hunt
This is the most important step. Use the dust-removal sticker (or a piece of clear tape) to "dab" the entire screen. Even if it looks clean, microscopic lint is probably there. Dab, don't wipe.
3. The Alignment
Peel the backing off the tempered glass (hold it by the very edges!). Align it with the earpiece and home button/bottom edge first.
Pro Tip: Keep the protector just millimeters above the phone while aligning to minimize the window for dust to enter.
4. The "Magic" Seal
Gently drop the protector onto the phone. Tap the center once. You’ll see the adhesive wave spread across the screen. If it gets stuck, a light press will help it finish the job.
5. The Final Buff
Use your microfiber cloth to push any remaining air bubbles toward the edges. If a bubble is stubborn, it's usually just air—keep pushing! If it won't move, there’s likely a dust speck (see our FAQ below).
Prefer the Expert Touch?
If the DIY approach isn't for you, we've got your back. Drop by any MiniFob location across Canada. Our technicians handle hundreds of devices a week—we can install your screen protector with surgical precision while you wait for your
Why Choose MiniFob?
Expert Techs: We don't do bubbles. Period.
High-End Materials: We only use premium-grade tempered glass.
Speed: We’ll have you protected and out the door in under 5 minutes.
Common Troubleshooting (FAQ)
Q: I see a bubble with a tiny speck in the middle. What do I do? A: That’s dust. Carefully lift the corner of the protector with a fingernail, use a piece of tape to "pluck" the dust off the sticky side of the glass, and let it reseal.
Q: Will a screen protector make my touch screen less sensitive? A: Not with MiniFob’s premium glass. Our protectors are designed to maintain 100% touch sensitivity and crystal-clear clarity.
Q: Can I put a case on right away? A: We recommend waiting about 15 minutes to let the adhesive fully set so the edges of the case don't accidentally lift the protector.
How to install a screen protector professionally
Get it done in 1-minute at FobToronto / SlickShield today! 30 Day money back guarantee.